Home Inspection
● Ensure easy access to attics, electrical panels, and major appliances including HVAC and water heater. Inspectors cannot move stored items, shelving units, parked cars, or other personal property.

● Full home inspections take approximately 3 hours. Findings are usually shared during the last 30 minutes, though times may vary depending on home size and condition.

Other Home Services:
Radon Testing
● Keep doors closed for 12 hours prior to arrival and throughout the 48-hour test. Keep doors closed for 12 hours prior to arrival and throughout the 48-hour test. A “non-interference form” required by the state must be signed.

Sewer Scopes
● Ensure all drains or clean-outs are accessible, typically in the basement, utility room, or crawl space. If you know the clean-out location, please share it in advance.

Water Testing
● Do not flush or rinse plumbing; leave the system undisturbed to ensure a reliable “first-draw” sample. For well water, ensure the wellhead, pressure tank, and treatment systems are accessible. Inform us if your home uses water softeners, reverse osmosis, UV systems, or other filters to determine the correct sampling location.

Indoor Air Quality / Mold Testing
● Keep all windows and exterior doors closed for 12 hours prior to arrival. Turn off air purifiers, ozone generators, or ionizers the day before testing.

Chimney Scan
● Ensure the fireplace or stove has not been used within 24 hours prior to inspection. Remove excess ash, firewood, or debris from the firebox. Move furniture, décor, or rugs at least 3–4 feet away from the fireplace area, as inspectors cannot move personal property for insurance reasons.

Inaccessible areas may require a return visit, adding time and cost to the home service process.